Design Rule Verification Report

Date	:	04/07/2008
Time	:	14:56:14
Elapsed Time	:	00:00:01
Filename	:	D:\diego\board arm7 placa\placa lpc2114-V2.PcbDoc

Summary

Warnings	Count
Drilled SMT Pads found	13
Total	13

Rule Violations	Count
Hole Size Constraint (Min=0.025mm) (Max=2.54mm) (All)	0
Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)	0
Width Constraint (Min=0.2mm) (Max=0.8mm) (Preferred=0.2mm) (All)	0
Clearance Constraint (Gap=0.2mm) (All),(All)	0
Broken-Net Constraint ( (All) )	0
Short-Circuit Constraint (Allowed=No) (All),(All)	0
Room Esquema-lpc2114-V2 (Bounding Region = (92.9mm, 46.5mm, 138mm, 116.8mm) (InComponentClass('Esquema-lpc2114-V2'))	0
Total	0